AR Blue Clean


2600 PSI 2.2 GPM Axial Radial Pressure Washer Pump

Write a Review
Reg. $155.99 Save $65.40
Currently out of stock

Free Deliveries

100% satisfaction guaranteed. More Details

Every Purchase Has a Purpose

5% goes to a cause you care about. Learn More

Anchor to Specifications and Description


The pump is one of the most critical parts of any pressure washer because it’s responsible for producing the high water pressure that delivers that satisfying blast of water for your cleaning chores. If your pump quits working, replacing it with the AR North America 2600 PSI Vertical Axial Radial Pressure Washer Pump is much less expensive than buying a whole new pressure washer. You can tell it may be time for a new pump if you turn on your pressure washer and it powers up just fine but doesn’t pressurize the water. Pressure-washer pumps can quit working for several reasons. Sometimes they were accidentally left running with no pressure relief. Maybe water left in the pump caused mineral build-up or corrosion, which can wear out the pump seals and piston. Other times they crack, or just suffer from natural wear and tear. Whatever the reason, it’s not unusual for a pump to give out while the washer still has plenty of life in it. Axial radial pressure washer pumps are a common design found in vertical-shaft pumps. This replacement pump is compatible with most gas-powered pressure washers with a rear-facing inlet/outlet connection. If your pressure washer has front-facing connections, check out the SRMW22G26-EZ. This gas-flange plunger pump handles a flow rate of 2.2 GPM and pressure of 2,600 PSI. The direct drive spins at 3,400 RPM and the matching flange gives you connection options with most 0.75 inch shafts on 4 to 7 horsepower (HP) engines. When your pump quits pumping, let this AR North America 2600 PSI vertical axial plunger pump get you back under pressure rather than buying a whole new pressure washer.


  • This S version of the vertical flange plunger pump for pressure washers has upgraded valves to improve functionality
  • Axial radial design with Easy Start Valve (EZ), thermal relief valve, and integral regulating valve
  • Features an optional system for detergent suction
  • With a 3-piston alternating volumetric build, the pump can be coupled to a variety of motors
  • For more efficiency, the intake valves were placed above the pistons
  • Sealing system features a double gasket
  • Features 2 bearing systems in support of the pistons and pump shaft
  • Tempered steel pistons driven by a swash plate mechanism
  • Constructed out of strong die cast aluminum alloy with steel and brass parts
  • Specifications:
  • Max PSI: 2600 PSI
  • Max GPM: 2.2 GPM
  • Oil capacity: 2.2 ounces
  • RPM: 3400 RPM
  • Max temperature: 140 F
  • Outlet: 22 mm x 1.4 M
Anchor to Reviews

No reviews yet for this product

24/7 Access to Experts

Free 1-3 Day Delivery

We make it easy to get what you need, ASAP.